This hi-tech gear, all that high-powered surface-mount LED and the lithium polymer with its in-built USB recharge is held in sweetly by a flexible silicone strap and clip. And as a cruiser it has a tool-less attachment for handlebars and frames of 22-32mm. Visible at over 500 metres, the Blinder 1 has the added advantage of being able to shift its looks with 6 faceplate styles available.
• Materials: UV-Resistant Industrial grade silicone. Polycarbonate Lens, Latch and Housing. Hard-anodised aluminium fascia.
• USB: Rechargeable Lithium Polymer battery
• REAR: 11 lumens (LED Rating)
• LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride
• Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead
• Visibility: Light is visible at over 500 metres.
• Light Modes: 5 light modes: Steady, Fast Flash, Organic Flash Slow, Organic Flash Fast, Eco-flash
• Burn Time: Burn time of over 2-hours in constant and up to 11-hours eco-flash mode
• Battery: Rechargeable Lithium polymer battery via integrated USB plug
• Integrated USB Plug: Designed to be exposed to the elements, the plug is also waterproof and will not be damaged by exposure
• Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. The light is switched off with a long button push off (0.5sec)
• Storage Mode: Storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isn't being used.
1. Charge the light for a full charge cycle. (indicator glows green when charged).
2. Remove light from USB charging device / port.
3. Turn light on in any mode.
4. Hold button down for more than 5 seconds, at which point the indicator LED will turn red.
5. The light itself will remain on until the Blinder switches itself off and into storage mode
• Bike Attachment: Tool-less attachment for handlebars/rear-posts and frames of 22-32mm ø
• 100% Waterproof: The Blinder 1 is IP66 Tested and 100% waterproof against all elements
• Testing: The Blinder 1 has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE certification
• Dimensions: 25 x 25 x 33mm
• Weight: 15g
This hi-tech gear, all that high-powered surface-mount LED and the lithium polymer with its in-built USB recharge is held in sweetly by a flexible silicone strap and clip. And as a cruiser it has a tool-less attachment for handlebars and frames of 22-32mm.
Be The First To Review This Product!
Help other Cycle Station users shop smarter by writing reviews for products you have purchased.
Review Knog Blinder 1 LED Rechargeable FRONT Bike Light - Black Skull - White Light
Thank you for writing a review. By sharing your thoughts, you help website visitors make a better purchasing decision. In addition, your feedback helps us to improve our products and service.
Spend $99 or more and the shipping is FREE*Conditions apply
Free Pickup available for Albury customers (No minimum spend)
Standard Shipping only $9.95 Australia Wide